Applied Resolution Technologies

BLX-635S GREEN IS TUNNEL/MINING LASER

BLX-515S : GREEN TUNNELLING AND MINING LASER, INTRINSICALLY SAFE, AUTOMATION ENABLED

Download the PDF brochure.

For many years we have been limited to either red Intrinsically Safe lasers, or some inefficient green laser systems that use complex and unstable technologies. Now, with the release of direct green laser diodes, we are able to offer the very first Intrinsically Safe, Long Range laser product that provides a bright green beam that is visible in the air under low ambient light conditions or with dust. Safe for Mining, safe for construction. Internationally Certified to IECEx Standards under Certification IECEx SIM 13.0005. And our new green systems have about the same battery life as our red lasers, unlike our competitors who us the old green laser technology which is power hungry.

The BLX-515S is a new release product for underground coal mining and hazardous area use which sets new standards in laser alignment. The BLX-515S emits a HIGHLY visible GREEN laser beam which is a Class 2M output, useful over several hundred metres.

The product USES 5x C-Cell batteries, with the laser aligned precisely to the hexagonal laser head geometry. The new -S models include an automation-enabling modulation that provides special signals embedded on the laser beam to be decoded by sensor systems.

The BLX-515S is also available in battery-removable versions. One version has a removable 5 x D-cell battery pack (quite heavy !!), but we also offer the same prodcut with a removable 5 x AA cell battery pack. The advantages of the removable battery packs are that the laser does not need to be taken to a safe zone to change the batteries. Although there is a slight reduction in battery life due to the Intrinsically Safe means inside the battery system, the advantages of not having to reset the laser are savings in time, and money.

 

BLX-515S1sml      green_lasers  HangBLX515

Features:

  • 5mW at 515nm GREEN laser output beam for usage in excess of 500 mtrs
  • 20mm Diameter Beam
  • Miniature laser control circuits (10.5mm diameter) using potted and encased
    surface mount technology
  • Separate battery and laser sections
  • Simple rotary on/off switch with nylon-tipped set screw lock to prevent removal
    underground
  • Power-controlled to remain within the Class 2M Laser safety guidelines irrespective of battery condition.
  • Intrinsically Safe fusing and high temperature encapsulation
  • Isolated laser diode component
  • Protective laser output window
  • Rotary switch doubles as battery access fo r5 approved C-cell batteries
  • Unique Automatic Power Control - laser power regulation based on
    proprietary circuitry
  • >100 hour battery pack for use over a number of shifts without any battery changing required
  • 50mm Diameter x 422mm Long
  • Developed and manufactured in Australia to the stringent requirements of IEC 60079-11:2011
  • Full back-up service and repair available at our Certified Repair Facility, ensuring your work-place safety is considered at all times.
  • Lasers can be serviced and re-certified to IEC 60079-19:2011 standards, for further use in hazardous environments
  • Compatible mounting and adjustment accessories : based on standard Surveyors accessori9es

Certification Details: (Currently under Test and Certification)

  • Group: I / II B
  • Type of Protection: Ex ia
  • Temperature Classification: 136 Deg C
  • Degree of Ingress Protection: IP54

IECEx SIM 13.0005 Certification

Repair Facility Certification

User Manual

More images

 

____________________________